SUMMIT

Technical Specifications

Custom Series

Top view of the Athabascan All Weather Pool model

Details

Outside Dimensions: 93’’ x 93’’ | 235 x 235 cm
Height: 39’’ | 98 cm
Heater(Watts): NA / Euro | 5500 / 2×3600
Water Capacity: 360 Gallons | 1363 Liters
Dry Weight: 935 Lbs | 424 Kg
Wet Weight: 3940 Lbs | 1787 Kg
Electrical Requirements North America:
240 Volt / 50 Amp | 4 Pumps = 60 Amp
Electrical Requirements Europe:
1Øx32 Amp | 3Øx16 Amp
(4 pumps = 1Øx40 Amp 3Øx-16 Amp / 3Øx20 Amp / 3Øx25 Amp)

Equipment Location

Equipment Location Summit

Dimensioned Drawings

Equipment Location Summit

Recommended Site Access and Preparation

CUSTOM SERIES WITH FOREVER FLOOR®

Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.

To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.

If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.
Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs

Your Spa can weigh as much a 1000lbs (454kg)